Eχω ενα καινουριο σφραγισμενο σετ 6φτερο δισκο πλατω ρουλεμαν και ελαφρωμενο βολαν για 89-91 fc3s αγορασμενο απο εδω:
http://www.ebay.com/itm/F1-RACING-STAGE-3-CLUTCH-KIT-11-LBS-CHROMOLY-FLYWHEEL-86-91-MAZDA-RX-7-TURBO-II-/150740893302?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ARX-7&hash=item2318db7e76&vxp=mtr
Μου εχει στοιχισει 580 ευρω με μεταφορικα και εκτελωνισμους....
Το πουλαω 280 ευρω γιατι χρειαζομαι τα χρηματα αμμεσα. Ευχαριστω !
Μανος 6949204002
F1 Racing Stage 3 clutch kit is a direct factory replacement clutch kit and it's designed for those who seek the ultimate in clutch performance and reliability. F1 Racing clutch kit includes only the highest grade clutch components from the world's leading racing clutch manufacturers. The 6-puck copper ceramic (also known as MIBA) disc features 12 high-coefficient friction pads that are resistant to slippage and ensures long lasting life. The heavy-duty sprung center unit boasts heat treated springs and retainer rivets for the maximum power and durability. The F1 Racing pressure plate features special single diaphragm design to increase clamp load. It features induction hardened diaphragm, CNC machined castings, stronger drive straps and rivets. F1 Racing pressure plate provides smooth and precise feel with easy modulation. All F1 Racing pressure plate is load tested on a special testing tool for quality assurance.
This complete clutch kit includes: •F1 Racing Heavy-Duty Pressure Plate
•F1 Racing 'MIBA' Copper Ceramic 6-puck Disc (240 mm, 23 spline)
•Release Bearing
•Pilot Bearing
•Alignment Tool
•Installation Guide
Horsepower Rating: 417 HP / Torque Capacity: 409 ft/lbs
F1 Racing Lightweight Chromoly Flywheels are made from 4140 one-piece billet chromoly steel. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance the air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel which has the possibility of separating from the flywheel. All F1 Racing Chromoly flywheels have passed engineering tests to 12,000 rpm. •Ultra heavy-duty and weighs only 11.15 lbs (stock flywheel weighs 23 lbs)
•Meets or exceeds SFI 1.1 specification
•Made from 4140 forged chromoly steel (2x stronger billet steel)
•F1 Racing Lightweight Chromoly flywheels incorporate special design features to enhance the airflow for improved clutch cooling
•F1 Racing Lightweight Chromoly flywheels work with every clutch including Exedy, ACT, Fidanza, Clutchmasters, and other OEM clutch kits
•CAD designed, CNC machined and computer balanced
•NOTE: Must be used with external counter weight balance which is sold separately. Please search our store for counter weight balance listings.
Retail Price: $ 995
http://www.ebay.com/itm/F1-RACING-STAGE-3-CLUTCH-KIT-11-LBS-CHROMOLY-FLYWHEEL-86-91-MAZDA-RX-7-TURBO-II-/150740893302?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ARX-7&hash=item2318db7e76&vxp=mtr
Μου εχει στοιχισει 580 ευρω με μεταφορικα και εκτελωνισμους....
Το πουλαω 280 ευρω γιατι χρειαζομαι τα χρηματα αμμεσα. Ευχαριστω !
Μανος 6949204002
F1 Racing Stage 3 clutch kit is a direct factory replacement clutch kit and it's designed for those who seek the ultimate in clutch performance and reliability. F1 Racing clutch kit includes only the highest grade clutch components from the world's leading racing clutch manufacturers. The 6-puck copper ceramic (also known as MIBA) disc features 12 high-coefficient friction pads that are resistant to slippage and ensures long lasting life. The heavy-duty sprung center unit boasts heat treated springs and retainer rivets for the maximum power and durability. The F1 Racing pressure plate features special single diaphragm design to increase clamp load. It features induction hardened diaphragm, CNC machined castings, stronger drive straps and rivets. F1 Racing pressure plate provides smooth and precise feel with easy modulation. All F1 Racing pressure plate is load tested on a special testing tool for quality assurance.
This complete clutch kit includes: •F1 Racing Heavy-Duty Pressure Plate
•F1 Racing 'MIBA' Copper Ceramic 6-puck Disc (240 mm, 23 spline)
•Release Bearing
•Pilot Bearing
•Alignment Tool
•Installation Guide
Horsepower Rating: 417 HP / Torque Capacity: 409 ft/lbs
F1 Racing Lightweight Chromoly Flywheels are made from 4140 one-piece billet chromoly steel. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance the air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel which has the possibility of separating from the flywheel. All F1 Racing Chromoly flywheels have passed engineering tests to 12,000 rpm. •Ultra heavy-duty and weighs only 11.15 lbs (stock flywheel weighs 23 lbs)
•Meets or exceeds SFI 1.1 specification
•Made from 4140 forged chromoly steel (2x stronger billet steel)
•F1 Racing Lightweight Chromoly flywheels incorporate special design features to enhance the airflow for improved clutch cooling
•F1 Racing Lightweight Chromoly flywheels work with every clutch including Exedy, ACT, Fidanza, Clutchmasters, and other OEM clutch kits
•CAD designed, CNC machined and computer balanced
•NOTE: Must be used with external counter weight balance which is sold separately. Please search our store for counter weight balance listings.
Retail Price: $ 995
